Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1Press the MENU button.
Result: The main menu is displayed.
2Press the or button to select Picture.
Result: The options available in the Picture group are displayed.
3Press the ENTER button.
4Press the ENTER button again.
Result: The options available in the Mode group are displayed.
5Select the option (Contrast, Brightness, Sharpness, Colour,
Tint) to be adjusted by pressing the or button. Press the ENTER button.
Result: The horizontal bar is displayed.
6Press the or button to reach the required setting. Press the ENTER button.
7When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.
Each adjusted setting will be stored separately according to its input mode.
The Tint is "inactivated" as following cases.
•Analog mode (RF, Scart, Video,
In case of an input signal setting to
•Component, DVI, and HDMI mode
In case of an input signal setting to 60HZ; 480i, 480p, 720p @60Hz, 1080i @60Hz.