BN68-00751C-00Eng 7/20/04 5:20 PM Page 17
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1Press the MENU 
button.
Result: The main menu is displayed.
2Press the 
or 
button to select Channel.
Result: The options available in the Channel group are displayed.
3Press the ENTER
button. Result: The Country is selected.
4Press the ENTER
button again. Select your Country by pressing the 
or 
button repeatedly.
Result: The following countries are available:
Belgie - Deutschland - Espania - France - Italia - Nederland - Schweiz - Sverige - UK -
East Europe - Others
5Press the ENTER
button.
6Press the 
or 
button to select Auto Store. Press the ENTER
button.
Result: The Start is selected.
7Press ENTER
button to search the channels.
The sub menu is changed from Start to Stop with channel search started.
Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press the 
or 
button to select Return and then press the ENTER
button.
To stop the search before it has finished, press the
ENTER
button with Stop selected.
8When the channels have been stored, you can:
Sort them in the order required (refer to page 19) Assign names to the stored channels (refer to page 20) Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)