Storing Channels Manually
9If you know the number of the channel to be stored,
Press the 
or 
button to select Channel and then press the
ENTER
button.
Select C (Air channel) or S (Cable channel) by pressing the 
or 
button.
Press the 
button to select channel.
Select the required number by pressing the 
or 
button and then press the ENTER
button.
If there is an abnormal sound or no sound,
You can also set a channel by pressing number buttons on the remote control.
10 If you do not know the channel numbers, press the 
or 
button to select Search and then press the ENTER
button.
Search by pressing the 
or 
button and then press the ENTER
button.
Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.
11Press the 
or 
button to select Store. Select Ok by pressing the ENTER
button.
Result: The channel and associated programme number are stored.
12Repeat steps 9 to 11 for each channel to be stored.
13Press the MENU
button to return to the previous menu or press the EXIT button to return to normal viewing.
Channel mode
P (Programme mode): When tuning is completed, the broadcasting stations in your area will have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by entering the assigned number to each broadcast station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number to each cable channel in this mode.