Samsung LN46A500T1F, LN40A500T1F Auto Wall-Mount Adjustment Sold separately, Entering the menu

Auto Wall-Mount Adjustment (Sold separately)

Once the auto wall mount is installed, your TV’s position can be easily adjusted.

Auto Wall-Mount

TV Rear Panel

Setup

EX-LINK Cable (Not supplied)

V-Chip

Caption

External Settings	►
Entertainment	: Off
Energy Saving	: Off
PIP
SW Upgrade

Entering the menu

1.Press the ▲, ▼, ◄ or ► button on your remote control.

➣The Wall Mount Adjustment screen is displayed.

➣If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen.

•Press the MENU button to display the menu. Press the ▲ or ▼ button to select

“Setup”, then press the ENTER button.

•Press the ▲ or ▼ button to select “External Settings”, then press the ENTER button.

•Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the

ENTER button.

Remembering the Position

2.Adjust to the desired position using the ▲,▼,◄,► buttons.

➣If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears.

➣Press the INFO button to reset. Press the ◄ or ► button to select “Yes”, then press the ENTER button. The position is initialized to the default setting.

3.Press the Blue button.

Press the ▲ and ▼ buttons to select a save mode from either Position 1,

Position 2 or Position 3 in order to save the current position.

➣To not save the current position, press the RETURN button.

➣When selecting a save mode, you cannot use the Color buttons.

4.Press the ENTER button to save.

➣When Position1 is selected, the message “Current position saved as Position1” is displayed.

5.Press the ENTER button.

➣The saved Position appears on the left side of the OSD.

Moving to the remembered position

1.Complete Step 1 of “Entering the menu”.

2.Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position.

External Settings

Melody: Medium

Wall-Mount Adjustment

	Move	Enter	Return
	Wall-Mount Adjusment
Position	1	2	3
Adjust	Save	INFO	Center

Save

Select a mode to Save.

Position1

Position2

Position3

Move Enter Return

Wall-Mount Adjusment

Position1

Position	1	2	3
Adjust	Save	INFO	Center

➣You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.

➣If you adjust the position after moving to a pre-set position, the position display will disappear.

➣For installation, refer to the Installation Manual provided with the wall mount.

➣For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.

➣This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer.

➣The auto wall mount will not work when Anynet+ is operating.

➣LN40A500T1F and LN46A500T1F models are not compatible with the older wall mount model (WMN5090A).

English - 69