Introduction
your digital output device using a HDMI ca- ble.
Up to HDMI cable 1.0 can be supported.
BNC OUT [R, G, B, H, V] (BNC Terminal (Output))
BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.
The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 LCD Displays can be connected (May not be supported depending on the connected cable).
Note
(Applicable to the
(BNC/Component Connection Terminal (input))
During component input, please check spec- ifications for the input ports below.
[R/Y, G/PB, B/PR, H, V]
•[R/Y]
•[G/PB]
•[B/PB]
Note
Applicable to the
RGB OUT
Note
Applicable to the
LAN (LAN Connection Terminal)
Note
Applicable to the