Viewing the Connection Panel
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
Rear of the TV | Side of the TV |
|
➢ The product color and shape may vary depending on the model.
1ANT IN
Connect to an antenna(air) or cable TV system.
2 AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a camcorder or VCR.
3AV OUT
Connect to the audio/video input jacks of a recording VCR.
4COMPONENT IN 1, 2
Connect Component video/audio.
5DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component.
6HDMI IN 2
7UPGRADE PORT (USB)
Connect for service and software upgrade.
8 HDMI/DVI IN (TX-T2791H/TX-T3091WH)
HDMI1/DVI IN
An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.
(HDMI/DVI connection to a computer is not possible. This TV cannot be used as a Monitor with your PC.)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)
DVI IN/AUDIO L/R
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
(O = supported, X = not supported)
| 480i | 480p | 720p | 1080i |
HDMI/DVI 60Hz | X | O | O | O |
Component | O | O | O | O |
9
Connect an
English - 4