Connecting a VCR
Connecting to Video
TV Rear Panel | TV Side Panel |
VCR Rear Panel
Audio Cable | 2 | ||
(Not supplied) | |||
|
|
1 | Unplug the cable or antenna from |
| the back of the TV. |
2 | Connect the cable or antenna to the |
ANT IN terminal on the back of the | |
VCR. | |
3 | Connect an Antenna Cable between |
the ANT OUT terminal on the VCR | |
and the ANT IN terminal on the TV. | |
4 | Connect a Video Cable between the |
VIDEO OUT jack on the VCR and | |
the AV IN 1 [Y/VIDEO] or AV IN 2 | |
5 | [VIDEO] jack on the TV. |
Connect Audio cables between the | |
AV IN 1 | |
TV and the AUDIO OUT jacks on | |
6 | the VCR. |
Press the SOURCE button on the | |
remote control until you see the VCR | |
signal (see “To Select the Source” |
on page 10).
➢When connecting a VCR, match the color of the connection terminal to the cable.
➢If you have a “mono”
➢Each VCR has a different back panel configuration.
➢When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Connecting to S-Video
TV Rear Panel | TV Side Panel |
VCR Rear Panel
2 | Antenna Cable (Not supplied) | |
Audio Cable (Not supplied) |
➢When connecting a VCR, match the color of the connection terminal to the cable.
➢Each VCR has a different back panel configuration
1 | To begin, follow steps |
previous section to connect the | |
antenna or cable to your VCR and | |
2 | your TV. |
Connect a | |
the | |
the | |
3 | Connect Audio cables between the |
AV IN 2 | |
TV and the AUDIO OUT jacks on | |
4 | the VCR. |
Press the SOURCE button on the | |
remote control until you see the VCR | |
signal (see “To Select the Source” |
on page 10).
English - 5