CONNECTING A CABLE BOX/SATELLITE RECEIVER
1 2
Audio Cable (Not supplied)
Component Cable (Not supplied)
1.Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver
2.Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2)
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu. |
|
|
|
Press the ▲ or ▼ button to select Channel, then press the ENTER button. | Channel | Antenna | : Air |
2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. | Auto Program | ► | |
|
| ||
Press the ▲ or ▼ button to select an antenna connection, then press the ENTER |
| Full Guide |
|
| Mini Guide |
| |
button. |
|
| |
| Default Guide | : Mini Guide | |
➢ Air: Air antenna signal. |
| ||
| Channel List |
| |
Cable: Cable antenna signal. |
| Fine Tune |
|
Air + Cable: Air and Cable antenna signals. |
| Signal Strength |
|
| LNA | : On | |
➢ If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is |
| ||
|
|
| |
connected to ANT 1 IN (AIR), select Air. |
|
|
|
➢ If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable. |
|
|
|
4The TV begins memorizing all available stations.
➢When pressing the ENTER button during a storing process, the message Would you like to stop the auto channel selection? is displayed. Select Yes by pressing the ◄ or ► button.
5After all the available channels are stored, the Auto Program menu reappears. Press the EXIT button to exit.
2