Samsung PLASMA DISPLAY manual Setting the PC, Adjustment, Image Lock Coarse/Fine, Image Reset

Setting the PC

➢Preset to the PC mode by pressing the SOURCE ( ) button.

TV			Setup	1	Press the MENU (		) button to display the menu.
	Plug & Play		√
				2	Press the … or † button to select Setup, then press the ENTER (				) button.
	Language	: English	√
	Time		√
	Energy Saving	: Standard	√	3	Press the … or † button to select PC, then press the ENTER (				) button.
	Blue Screen	: Off	√
	Melody	: Off	√
	PC		√	4	Select the required option by pressing the … or † button, then press the
	Screen Burn Protection		√
					ENTER (	) button.
Move	Enter		Return
					Available options: Image Lock, Position, Image Reset, Auto			Adjustment
TV			PC
	Image Lock		√	5	When you are satisfied with your setting, press the ENTER (			) button.
	Position		√
	Image Reset		√
	Auto Adjustment		√	6	Press the EXIT button to exit.

Move	Enter	Return
TV		Image Lock
Coarse		50
Fine		19
Move	Enter	Return

TV Position

◆Image Lock: Coarse/Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again.

After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1Press the … or † button to select Coarse or Fine, then press the ENTER ( ) button.

2Press the œ or √ button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Press the ENTER ( ) button.

◆Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

1Press the … or † buttons to adjust the V-Position.

2Press the œ or √ buttons to adjust the H-Position, then press the ENTER ( ) button.

V-Position H-Position Return

Image Reset has completed.

Auto Adjustment in progress.

Please wait.

◆Image Reset:

You can replace all image settings with the factory default values.

◆Auto Adjustment:

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.

The values of fine, coarse and position are adjusted automatically.

➢You can select these options simply by pressing the PC button on the remote control.

English - 20