Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Picture, then press the ENTER ( ) button.

3Press the ENTER ( ) button twice.

4Select the required mode by pressing the … or † button, then press the ENTER ( ) button.

Available modes: Dynamic, Standard, Movie, and Custom

➢The setting values may vary depending on the input source. (ex. RF, Video, Component, PC, or HDMI)

5Press the EXIT button to exit.

➢You can select these options simply by pressing the P.MODE button on the remote control.

➢◆ Choose Dynamic for viewing the TV during the day or when there is bright light in the room.

◆Choose Standard for the standard factory settings.

◆Choose Movie when viewing the movie.

◆Choose Custom if you want to adjust the settings according to personal preference.

Your television has several setting options that allow you to control the picture quality.

Move Enter Return

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Picture, then press the ENTER ( ) button.

3Press the ENTER ( ) button twice.

4Select the required mode by pressing the … or † button, then press the ENTER ( ) button.

Available modes: Dynamic, Standard, Movie, and Custom

5Select the required option by pressing the … or † button, then press the ENTER ( ) button.

6When you are satisfied with your setting, press the ENTER ( ) button.

7Press the EXIT button to exit.

◆Contrast – Brightness – Sharpness – Colour – Tint (NTSC only)

◆Contrast – Brightness – Colour : PC Mode

Press the œ or √ button until you reach the optimal setting.

◆Reset: You can return to the factory defaults picture settings.

➢ The reset function is set for each picture mode and colour tone.

English - 18