Samsung TA950 user manual Wireless, IP Settings

Basic Features

How to set up manually

How to set up automatically

To set up your TV’s cable network connection manually, follow these steps:

	IP Settings
IP Mode	Manual
IP Address	0 . 0 . 0 . 0
Subnet Mask	0 . 0 . 0 . 0
Gateway	0 . 0 . 0 . 0

Network Settings

Select a network connection type.

Wired

Wireless (general)

WPS(PBC)

One Foot Connection

	Previous
Set up a wireless network by	Next
selecting your wireless router.
You may need to enter a	Cancel
security key depending on the
settings of the wireless router.

DNS Mode		Manual
DNS Server	0 . 0 . 0 . 0
	OK

1.Follow Steps 1 through 2 in the “How to set up automatically” procedure.

2.Select the IP Settings on network test screen.

3.Set IP Mode to Manual.

4.Press the dbutton on your remote to go to the IP Address.

5.Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another.

6.When done, select the OK.

7.The network test screen appears, and network setting is done.

¦¦ Wireless

□□ Network Settings (Auto)

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

xx The displayed image may differ depending on the model.

1.Go to Network Settings screen. To enter it, follow the directions of Network Settings.

2.Select the Wireless (general).

3.The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4.In the list of networks, press the u or d button to select a network, and then press the ENTERE button. ✎✎ If the wireless router is set to Hidden (Invisible),

you have to select Add Network and enter the correct Network Name (SSID) and Security key to establish the connection.

5.If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have security, go to step 7.

6.If the wireless router has security, enter the Security key(Security or PIN), then select Next.

Network Settings

Enter security key.

a	b	c	d	e	f	1	2	3	Previous
g	h	i	j	k	l	4	5	6	Next
m	n	o	p	q	r	7	8	9
s	t	u	v	w	x	y	z	0	Cancel
a/A				Delete			Space

✎✎ When you enter the Security key(Security or PIN), use ▲ / ▼ / ◄ / ► buttons on your remote to select number/characters.

✎✎ You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.

7.The network connection screen appears, and network

setting is done.

✎✎ If it fails to set Security key(Security or PIN), select Reset or IP Settings.

✎✎ If you want to set connection manually, select the IP Settings. Refer to following “How to set up manually”.

English 37