Samsung Series 9 user manual Using the Anti-Theft Kensington Lock depending on the model

Using the Anti-Theft Kensington Lock (depending on the model)

The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately.

1.Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2).

2.Connect the Kensington Lock cable.

3.Fix the Kensington Lock to a desk or a heavy stationary object.

NThe location of the Kensington Lock may be different depending on its model.

Cable

Figure 2

Figure 1

<Optional>

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

Wall Wall

To avoid the TV from falling:

1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

N You may need additional material such as an anchor depending on the type of wall.

N Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2.Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. N Screw Specifications

-For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15

3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.

N Install the TV near to the wall so that it does not fall backwards.

N It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

N Untie the string before moving the TV.

4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

English - 64