10 Specifications
10.3 Standard Signal Mode Table
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
DP
|
| Horizontal | Vertical | Pixel | Sync Polarity | |
| Resolution | Frequency | Frequency | Clock | ||
| (H/V) | |||||
|
| (kHz) | (Hz) | (MHz) | ||
|
|
| ||||
|
|
|
|
|
| |
| 1920 x 1080 | 113.221 | 99.930 | 235.500 | + / - | |
Normal/ | 100 Hz | |||||
|
|
|
| |||
|
|
|
|
| ||
3D | 1920 x 1080 | 137.260 | 119.982 | 285.500 | + / - | |
| ||||||
| 120 Hz | |||||
|
|
|
|
| ||
|
|
|
|
|
|
10 Specifications 75