Sony MHC-RG59)S/RG490S/RG290/RG190, MHC-GX470 To stop recording, To cancel the sound effect, 19GB

4Start recording.

While recording, you cannot listen to other sources.

For CD Synchro Recording:

Press REC PAUSE/START . When the recording is completed, the CD player and the tape deck stop automatically.

For Manual Recording:

Press REC PAUSE/START , and then start playing the desired recording source. If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise.

For Sound Mixing:

Press REC PAUSE/START , and then start playing the desired source and start singing or speaking into the microphone. If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone.

To stop recording

Press  .

Notes

•Recording stops if you change to a different function.

•When loud sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control function).

•You cannot eject the disc during CD Synchro Recording.

Creating your own sound effect

You can raise or lower the levels of specific frequency ranges, and then store the setting as “USER” in the memory.

1Select the audio emphasis you want for your basic sound using

EQ, and SURROUND and GROOVE on the unit .

2Press EQ BAND  repeatedly to

select a frequency band, and then turn the MULTI JOG dial  on the unit to adjust the frequency level.

Repeat this for each band you want to adjust.

Frequency band Frequency level

3Hold down EQ  until “COMPLETE” appears.

The setting is stored in the memory.

4To call up the personal sound effect, press EQ  repeatedly until “USER” appears.

To cancel the sound effect

Press EQ  repeatedly until “EQ OFF” appears.

Other Operations

19GB