Samsung PS-50C9H, PS-42C9H, PS-42C91H Viewing an External Signal Sources, Editing Device Names

You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV source (broadcast or cable).

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the ENTER button.

3Press the ENTER button again to select Source List.

4Press the ▲ or ▼ button to select the signal source, then press the ENTER button.

Available signal sources: TV, AV1, AV2, S-Video,Component1, Component2, PC, HDMI1, HDMI2

➢ Only the connected devices can be selected.

TV

AV1: −−−−−

AV2: −−−−−

S-Video : −−−−−

Component1 : −−−−−

Component2 : −−−−−

PC: −−−−−

HDMI1 : −−−−−

HDMI2 : −−−−−

Move Enter Return

You can give a name to the external source.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the ENTER button.

3Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.

4Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER button.

5Select the required device by pressing ▲ or ▼, then press the ENTER button.

Available device names: VCR, DVD, D-VHS, Cable STB,

HD STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR (DVD HDD Recorder), PC.

6Press the EXIT button to exit.

➢When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 1 port, you should set the HDMI1 mode to PC in the Source List of Input mode. If the HDMI1 mode is not PC, it may work depending on the TV setting.