Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3Press the ▲ or ▼ button to select Screen Burn Protection, then press the ENTER button.
4Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Available options: Pixel Shift, All White, Signal Pattern, Side
Gray
5When you are satisfied with your setting, press the ENTER button.
6Press the EXIT button to exit.
Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.
− Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTER button.
− Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Available options: Horizontal Dot, Vertical Line, Time ➢ Optimum condition for pixel shift;
| PC | TV/Ext/Component/HDMI |
Horizontal Dot | 1 | 2 |
Vertical Line | 1 | 2 |
Time (minute) | 2 min | 2 min |
T V |
| Setup |
|
|
| More |
|
|
|
| HDMI Black Level : Low | | ||
| PIP |
| | |
| Screen Burn Protection | |
| |
| Move | Enter | Return | |
|
|
|
|
|
T V | Screen Burn Protection | |||
|
|
|
|
|
| Pixel Shift |
| |
|
| All White |
| | |
| Signal Pattern |
| | |
| Side Gray | : Dark | | |
| Move | Enter | Return | |
|
|
|
| |
T V | Pixel Shift |
|
| |
|
|
|
| |
| Pixel Shift | : On | |
|
| Horizontal Dot | : 2 | | |
| Vertical Line | : 2 | | |
| Time | : 2 | | |
| Move | Enter | Return | |
➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode.
All White: This function helps remove after images on the screen by changing the colour of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.
Signal Pattern: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
➢To remove after images on the screen, use either All White or Signal Pattern function. Although both of the two functions remove after images on the screen, Signal Pattern is more effective.
➢The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not improved after the execution of the function, repeat the function again.
➢Press any button on the remote control to cancel this feature.
English - 29