Samsung PS-58P96FD manual Switching Your Television On and Off

Page 9

Installing Batteries in the Remote Control

1Lift the cover at the back of the remote control upward as

shown in the figure.

2 Install two AAA size batteries.

➢  Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

 Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure.

➢Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

➢If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The main lead is attached to the rear of the television.


1	Plug the main lead into an appropriate socket.
	➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2	Press the		(Power) button (On/Off) on the front of the television or press the POWER button on the

	remote control to switch the television on. The programme that you were watching last is reselected
	automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
	Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.
	➢ If the television is initially powered on, several basic customer settings proceed automatically.
3	Refer to “Plug & Play Feature” on page 10.
	To switch the television off, press the						(Power) button (On/Off) on the front of the television or press


	the POWER button on the remote control.
4	To switch the TV on, press the				(Power) button (On/Off) on the front of the TV or press the POWER

	button or number buttons on the remote control.

English - 9

Image 9

Contents BN68-01352B-01 Model Serial No PDP-TELEVISIONUser Instructions Contents Checking Parts Using the Stand-BaseFerrite Core Cable. PS-58P96FDControl Panel Connection Panel Headphones jackSide Panel Video or Video / Audio L/REXT 1, EXT Input/Output SpecificationCommon Interface Slot Supported modes for Hdmi and ComponentTeletext Functions Viewing the Remote ControlSwitching Your Television On and Off Installing Batteries in the Remote ControlMain lead is attached to the rear of the television Plug & Play Feature Viewing the MenusPress the Exit button to exit from the menu Auto Store 40 MHz If you want to reset this feature … Viewing External Signal SourcesEditing Device Names Not available in DTV or external input modeStoring Channels Automatically You can give a name to the external sourceStoring Channels Manually Adding / Locking Channels Assigning Names to Channels Sorting the Stored ChannelsWeak signal Fine Tuning Channel ReceptionPreamplifier boosts the incoming signal LNA Low Noise AmplifierChanging the Picture Standard Customizing the Picture SettingsYou can set detailed picture settings Configuring Detailed Settings on the PictureSettings can be selected Picture mode is in Standard modePositioning and Sizing the screen using Zoom Selecting the Screen ModeSelecting the Picture Size Just ScanFreezing the Current Picture Digital NR / Active Colour / DNIe / Movie PlusSound Features Nicam Selecting the Sound Mode depending on the modelTime Features Available options Language, Blue Screen, Melody Press the or button to select Setup, then pressLight Effect, Energy Saving, Hdmi Black Level Button Press the Exit button to exitSelecting game menu Using the Game ModeUsing the remote Control Buttons Wall- mount adjustment Sold separately PS-50P96FDEntering the menu OperationsViewing the Picture in Picture PIP Screen Burn Protection GrayTV/Ext/AV/S-Video Setting up Your PC Software Based on Windows XP HDMI/DVI Input Display ModesImage Reset Setting the PC Auto Adjustment  Image ResetSetting the Home Theatre PC Settings in PC ModeStandard or Movie as in PC Mode Previewing the DTV Menu System Language Audio Language Displaying Programme InformationAutomatically using channel You can specify the frequency KHz usingManual Store You can specify the channel for a fast channel searchEdit Favourite Channels If The Favourite Channels settings have beenTo display all currently stored channels Favourites listChannels and all channels Channel ListYou can preset the default guide style Default GuideLanguage All Channels and Favourite ChannelsThis menu consists of 4 sub-menus Audio Language / Subtitle Language / Teletext LanguageThis menu consists of 6 sub-menus  If you change the language setting, the AudioUser selects a channel Then press the ENTER/OK buttonThis menu consists of 8 sub-menus Menu TransparencyParental Lock Feature is enabled Subtitle button on the remote controlAre displayed − Subtitle On / Off Manual Upgrade − Software Version / Firmware Version − Signal Information Standby Mode upgrade On / Off System− Common Interface  Installing the CI Card  Application Info CI Menu What is Anynet+? Connecting Anynet+ DevicesTo connect to Home Theatre Meassage Configuring Anynet+ connection... is Setting Up Anynet+Recording Listening through a Receiver Cancel Teletext Feature depending on the modelExit from the teletext display depending on the model IndexEnglish Wall Mount Kit Specifications Vesa InchStandard Screw Quantity Setting Up Your Remote Control Setting Up the Remote to Operate Your VCRSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your Set Top Box Setting Up the Remote to Operate Your DVDVCR Remote Control CodesSamsung SET-TOP BOX Samsung DVD Troubleshooting How to assemble the Stand-Base depending on the modelPC Resolution SpecificationsDimension WxHxD WeightCorrect Disposal of This Product Comment contacter Samsung dans le monde Contact Samsung WORLD-WIDEKontakt zu Samsung Contatta Samsung WORLD-WIDECountry Customer Care Centre  Web Site