Samsung UN40EH5000 user manual Getting Started, Accessories, Input Cables Sold Separately

Getting Started

Accessories

• Remote Control (AA59-00600A) &		•	Owner’s Instructions
		•	Power Cord
	Batteries (AAA x 2)
• Warranty Card / Safety Guide		•	Wire Holder Stand (BN61-05491A)
Input Cables (Sold Separately)
•	RS232 (AA39-00311A)	•	Component
•	Audio	•	Composite (AV)
•	HDMI	•	Coaxial (RF)
•	HDMI-DVI
✎✎ Check the cable before plug-in
	Cable		Ports
	HDMI
	USB
	Optical

Do not plug cable upside down.

Be sure to check before plug-in.

TV Controller (Panel Key)

Function menu

MEDIA.P

m R

✎✎ When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.

✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)

		Selecting a language
	Plug & Play		Select the desired OSD (On Screen
Select Language of the OSD.		English	Display) language.
Language	 FrançaisEspañol

	U Move	E Enter
		
		
		
	Selecting a Home Use mode
			•	Select the Home Use mode. Store
Plug & Play
Select ‘Home Use’ when installing this TV in your home.				Demo mode is for retail environments.
			•	When pressing TV controller, the
		
				function menu screen appears. Select
Store Demo	Home Use			the MENU(m) and press it more than 5
				seconds using the controller. The Store
	L Move	E Enter		Demo mode is set. Cancel the Store
				Demo by selecting Source List(s)
				and pressing it more than 5 seconds.



Selecting an antenna

P

Return

TV Controller

	Plug & Play
Select the Antenna source to memorize.
Air			Start
Cable			Start
Auto			Start
			
			
	U Move	E Enter	m Skip

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button.

	Remote control sensor
Power on	Turns the TV on by pressing the controller in standby mode.
Adjusting the volume	Adjusts the volume by moving the controller from side to
	side when the power is on.
Selecting a channel	Selects a channel by moving the controller up and down
	when the power is on.
	Press the controller when the power is on, then the function
Using the function menu	menu screen appears. If you press it again, the function
	menu screen disappears.
	Selects the MEDIA.P by moving the controller in the
Selecting the Media Play	function menu screen. The Media Play main screen
	appears.
	Selects the MENU(m) by moving the controller in the
Selecting the MENU (m)	function menu screen. The OSD(On Screen Display) of your
	TV’s feature appears.
Selecting the Source	Selects the Source List(s) by moving the controller in the
List (s)	function menu screen. The Source List screen appears.
Power Off (P)	Selects the Power Off (P) to turn the TV off by moving the
	controller in the function menu screen.

✎✎ Exits the menu when pressing the controller more than 1 second.



Setting the Clock Mode

	Plug & Play	Set the Clock Mode automatically or
Set the Clock Mode.		manually.
		•	If you select the Auto, set the
	: Auto
Clock Mode			DST(Daylight Saving Time).
		•	On the DST screen, press ENTERE,

then select whether to turn DST

(Daylight Savings Time) on or off. Select

E Enter m Skip the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTEREbutton.

- 2 -