Storing Channels Manually
You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1 Press the MENU button.
Result: The main menu is displayed.
2 Press the 
or 
button to select the Channel.
Result: The options available in the Channel group are displayed.
3 Press the ENTER
button.
4 Press the 
or 
button to select the Manual Store. Press the ENTER
button.
Result: The options available in the Manual Store group are displayed with the Prog. No selected.
5 Press the ENTER
button again.
To assign a programme number to a channel, find the correct number by pressing the 
or 
button and then press the ENTER
button.
6 Press the 
or 
button to select Colour System. Press the ENTER
button.
Select the Colour System required by pressing the 
or 
button repeatedly and then press the ENTER
button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT 4.43 - NT 3.58
7 Press the 
or 
button to select Sound System. Press the ENTER
button.
Select the Sound System required by pressing the 
or 
button repeatedly and then press the ENTER
button.
Result: The sound standards are displayed in the following order:
BG - DK - I - M
8 For all the channels to move to the required channel numbers, repeat steps 5 to 6 after selecting Prog. No by pressing the 
or 
button.
You can also set Prog.No by pressing number button on the remote control.