Samsung DSB-A100F manual Basic Functions

Page 7

DSB-A100F

BASIC FUNCTIONS

1. Display Screen

BASIC FUNCTIONS

3. Select Soundtrack

DSB-A100F

Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first.

Press YELLOW(ALT) key to see the soundtrack list.

Press  /  and OK key to select one.

After the television channels have been programmed, you will see the following picture(banner) each time you switch channels:

Channel Number

4. Select Videotrack

Press YELLOW(ALT) key twice to see the videotrack list. Press  /  and OK key to select one.

Signal Status

Program Information

Current Favorite

The number of soundtrack in current channel

GB

Press the RED( i ) key in view mode.

Select the channel by pressing NUMERICAL (0~9) keys or  /  keys and select TV/RADIO key to move to TV or Radio channel.

You will also see this picture each time you change channels.

When you press TV/RADIO key on the Remote Control Unit, TV and RADIO program are toggled.

Detailed program information

Press the RED( i ) key twice while you are viewing a program.

First you will see the banner described above.

After the RED( i ) key is pressed in the second time, detailed information for current program can be displayed on another banner, if there is more information. When this information is more than one page, PG+/PG- keys can be used for page up and down.

Note : This service depends on service provider.

2. Volume Control

5. Sub channel List

When subchannels are available on current channel (program) after changing channel, [C] is displayed at the right corner on the banner. In this case, press the YELLOW(ALT) key. Then you can get all subchannel list.

Select subchannel which you want among subchannel list.

6. Service List

Press OK key to while you are viewing a program.

Select list by pressing TV/RADIO or FAV key.

The icon behind the channel name symbolises

scrambled channel, and the icon behind the channel name shows parental lock channel.

Select the channel by pressing  / , PG+/PG-.

Press OK key to watch that channel.

To control the volume level :

Press  / , VOL- or VOL+ keys to adjust the volume level.

Press MUTE key to turn to silence mode.

Press MUTE key again or  /  keys in order to cancel the mute function.

The colour key corresponds the following service list.

Green(TEXT) key

: Favorites

Yellow(ALT) key

: Alphabetical

Blue(AUDIO) key

: Provider

Red( i ) key

: Transponder

GB-10

D I G I T A L

S A T E L L I T E

R E C E I V E R

GB-11

Image 7
Contents Instructions for use Overloading Safety InstructionsUser Section Content General FeaturesConnecting the Receiver with Antenna System Connecting Your STBFront Panel Rear Panel DescriptionNumerical keys Remote Control UnitBasic Functions Service Transponder Service FavoritesService Alphabetical Service ProviderNear Video on Demand Nvod Audio ModeTeletext OSD Teletext VBIMain Menu InstallationLNB Setting Operating the ReceiverTo download channels automatically Auto ScanningOff No Scan All Screen display will be as follows Reset to Factory DefaultsManual Scanning Horizontal/Vertical/Circular Left/Circular RightChannel Organising Set Channel Lock To cancel the lockParental Lock Move & Edit ChannelLanguage Selection System SetupOSD Setting Change PIN CodeTime & Timer Setting Media SettingsSystem Information Software UpgradeCopy Channel Data Disposal Troubleshooting Technical SpecificationsSerial data interface MemoOutput RF modulator