GENESIS OWNERS MANUAL
Setting the LCD
With these settings, you can set the Genesis to constantly display the LCD when not in use, or show a blank screen when not in use. Additionally, you can control the contrast of the screen and the color of the backlighting.
| To activate the LCD On/Off setting, press | |
| this button. See below. | |
LCD |
| |
| To activate the CONTRAST setting, press | |
LCD ON | this button. See the next page. | |
CONT |
| |
BRIGHT | To activate the BRIGHTNESS setting, press | |
this button. See the next page. | ||
| ||
EXIT | To exit without saving any changes you | |
| have made, press EXIT. | |
|
|
LCD
OFF
TIMER 10S 
SAVE
EXIT
LCD Timer Setting:
If you set the LCD to OFF, the timer set- 
tings will appear. The LCD will go blank after waitting the interval you set here by
adjusting the LEFT and RIGHT arrow keys.
The timer can be set to turn off the LCD between 10 seconds and 20 minutes.
The Timer Interval is displayed here.
To SAVE any changes you have made, press SAVE.
To exit without saving any changes you have made, press EXIT.
To change the timer interval, press the
LEFT or RIGHT arrow keys.
Page 8