Universal Remote Control MX-3000 owner manual Pickup Settings, Calibration, Factory Default, Exit

MX-3000 COLOR TOUCH SCREEN

Pickup Settings

You can set your MX-3000 to only turn on when touched, or every time you move it.

The Pickup Screen

Calibration

If you like, you can calibrate where you tap by running the calibration. You will need a pen top or PDA stylus to do this. Do not attempt to calibrate using your fingers.

Factory Default

The Calibration Screen

WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the MX-3000 to the factory condition. All your programming will be lost!

Exit

The Default Screen

When you have finished adjusting Settings, simply tap the EXIT button to return to normal operation.

The Exit Button

Page 7