94948 Revised Size 1/21/02 2/25/02 4:28 PM Page 9
Programming Cable Box Using Code Lists
Note: The Indicator Light will blink after each number is entered.
6.Enter the second digit in the code with the PLAY button the same way as in step 5. If the number is 0, do not press PLAY and proceed to next step.
7.Enter the third digit in the code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step.
8.Press STOP after code is entered and the Indicator Light will turn off.
9.With your Cable Box on, press CHANNEL Up. If the Cable Box responds, no further programming is required.
10.Enter your code here for easy reference.
2ND CODE X NUMBER
3RD CODE X NUMBER
CABLE/ OTHER
DEVICEBOX CODE
8