94902 Revised Size 2/25/02 4:03 PM Page 12
Exiting the Menu Mode:
To exit the Menu Mode and clear the screen push the DEVICE button on the remote. The INDICATOR LIGHT should go out indicating the remote
is now out of Menu Mode and will revert to it’s normal mode of operation.
NOTE: The remote will automatically exit the Menu Mode after 10 seconds of inactivity with no buttons being pushed.
Special Notes:
1.Because of the wide variety of menu formats, some experimenting may be required.
2.SONY: Pressing the ENTER button while in Menu Mode returns to previous menu.
3.ZENITH: Push the MENU button a second time to move from the
Operating a TV/VCRCombo
Some TV/VCR combination units may be controlled by using a combination of TV and VCR codes. For example, the Samsung TV/VCR combo unit may be controlled by both the Samsung TV code and the Samsung VCR code.
GE, RCA and ProS can Brand Devices:
Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming is required, the code search method is suggested. Note: With these brands, the device button (TV, VCR) will usually turn the units on. The OFF/ON button will only turn these devices off.
Low Batter y Warning:
When your batteries are weak, the Indicator Light will blink indicating it is time to change batteries.
11