94901 Revised Size 1/29/02 2/25/02 4:15 PM Page 7
Programming for Cable Box
1.Manually turn on the Cable Box.
2.Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button.
3.Press and release the CAB button (the
INDICATOR LIGHT will blink then remain lit).
4.Find the three digit code for your Cable Box in the code list in the back of this book and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5.Aim the remote at your Cable Box and press the POWER button. Your Cable Box should turn off.
BLINK
OFF
Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.
6.With your Cable Box on, press CHANNEL UP. If the Cable Box responds, no further programming is required.
CABLE BOX CODE
7.Enter your code here for easy reference.
6