GE 24922 instruction manual Programming Your Remote, Direct Code Entry Recommended

Page 6

Programming Your Remote

Your GE universal remote control is designed to control multiple audio/video devices such as TV, DVD, DVR, satellite, cable and audio using only one remote. To use this remote, you will need to program it to control the devices of your choice. There are two ways to program the remote - direct code entry or auto code search.

Direct Code Entry (Recommended)

1.Locate the Remote Code List provided in this manual. Find the DEVICE CATEGORY you wish to program (for example TV, DVR, CBL, DVD, SAT, AUX) and then find the BRAND of that device. Circle all the codes under that brand. Example: For a GE TV, locate the TV code section then circle all of the GE TV codes.

2.Manually turn on the device you wish to control.

3.Press and hold the SETUP button

until the red indicator light stays on (approximately 4 seconds) and then release the SETUP button.

4.Press and release the desired device button on the remote (TV, DVR, CBL, DVD, SAT, AUX). The red indicator will blink once and then remain on.

5.Enter the first 4-digit code previously found in the code list using the number buttons on the remote. If the code entered is a valid code, the red indicator light will turn off. If the code entered is not a valid code, the red indicator light will flash and remain on allowing you to re-enter the code.

Note: If no buttons are pressed for 10 seconds, the remote will exit the SETUP mode and you will have to start over.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 24922 Table of Contents Battery Precautions SetupTo Install the Batteries Battery SaverButton Functions Onoff Turns devices On or OffButton Functions, EnterProgramming Your Remote Direct Code Entry RecommendedProgramming Your Remote, Programming NotesAuto Code Search Controlling Combo Devices Using Your Remote Master Volume FeatureUsing Your Remote, Reset to Factory SettingsCode Identification Troubleshooting Remote does not operate your deviceDay Limited Warranty FCC Statement Índice Configuración Para Instalar las PilasNotas Funciones de los Botones TV, DVR, CBLFunciones de los Botones, continuación Programación de su Control Remoto Entrada Directa de Códigos se RecomiendaProgramación de su Control Remoto, Notas Sobre la ProgramaciónProgramación de su control remoto, Búsqueda Automática de CódigosControl de Aparatos Combinados Para Desactivar la Función de Volumen Principal Función de Volumen PrincipalPara Habilitar la Función de Volumen Principal Uso de su Control RemotoPara Restablecer las Configuración Predeterminadas Identificación de códigosSolución de Problemas El control remoto no controla el dispositivoGarantía Limitada de 90 Días Declaración de la FCC Code List Lista de Códigos 50245025, 5077 5013, 5020 5484 TV/VCR Combos TV/DVD CombosSAT/CBL Hdtv Set Top Boxes DVD HD-DVD DVD-RDVD/VCR Combos DVR/PVR VCR6307, 6311 AUX 60617086 Audio AMPUniversal Remote
Top Page Image Contents