Sony KDF-E50A10 Accessing the Audio Settings, Selecting Audio Options, Simulated uses SRS 3D Mono

Using the Settings

Accessing the Audio Settings

1. Press WEGA GATE WEGA GATE

2.Select Settings...............

3.Highlight........................

4. Press to select................

Antenna
Audio
Custom settings
Sound Mode	Custom	Dynamic
Reset		Standard
Treble	0	Custom
Bass	0
Balance	0
Steady Sound	Off
Volume Offset	0
Effect	Off
BBE	Off

To highlight an option and to change settings, press V v B b.

Press to confirm the selection.

To exit the Audio, press WEGA GATE .

Selecting Audio Options

zSound Mode settings are independent of settings in the Treble/Bass options.

zTruSurround XT attempts to create the same surround effect produced by a multichannel system using the left and right speakers.

The Audio settings include the following options:

Option	Description
Sound	Dynamic	Select to enhance treble and bass.
Mode
	Standard	Suitable for spoken dialog.
	Custom	Flat setting.
Reset	Reset the following options to the default setting: Treble, Bass,
	Balance, Steady Sound, Volume Offset, Effect and BBE.
Treble	Adjust to increase or decrease higher-pitched sounds.
Bass	Adjust to increase or decrease lower-pitched sounds.
Balance	Adjust to emphasize left or right speaker balance.
Steady	On	Select to stabilize the volume across all programs
Sound		and commercials.
	Off	Select to turn off Steady Sound.
Volume	Adjust to increase or decrease the sound level of the current input
Offset	(TV or video input) relative to other inputs.
Effect	TruSurround	Select for surround sound (for stereo programs
	XT	only).
	Simulated	Adds a surround-like effect to mono programs.

✍Simulated uses SRS 3D MONO.

	Off	Normal stereo or mono reception.
BBE	Select to give sound more impact by compensating for phase effects
	in speakers. Select from High, Low, and Off.

66