Reflector Brackets

Insert the open end of one corner reﬂector in-between the top of the

reﬂector brackets (Figure 7). (Elements should be on top.) Align the holes in the brackets with the hole in the corner reﬂector. Insert a large screw through the holes. Thread a small ﬂange nut on the screw.

Figure 7

Next, insert the open end of the second corner reﬂector in-between the bottom of the reﬂector brackets (Figure 8). (Elements should be on bottom.) Align the holes in the brackets with the hole in the corner reﬂector. Insert a large screw through the holes. Thread a small ﬂange nut on the screw.

Figure 8

Tighten the two ﬂange nuts. See Figure 9.

Figure 9

Screws