LG Electronics 42LV5400, 65LW6500, 60PZ950U manual Network Connection, Connecting to a wired network

48ENTERTAINMENT

ENTERTAINMENT

Network Connection

Connecting to a wired network

Connect the TV to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings.

If wired and wireless networks are both available, wired is the preferred method.

After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments.

For detail information, contact your internet provider or router manual.

I

J

Intemet

CAUTION

Do not connect a modular phone cable to the LAN port.

Since there are various connection methods,

please follow the specifications of your telecommunication carrier or internet service

provider.

After connecting the LAN port, use the Premium or LG Apps menu.

To set up the network settings: (Even if your TV

has already connected automatically, running setup again will not harm anything)

1Press Home to access the Home menu.

2Press the Navigation buttons to scroll to SETUP and press ENTER.

3Press the Navigation buttons to scroll to NETWORK and press ENTER.

4Press the Navigation buttons to select Network Setting and press ENTER.

5If wired and wireless are simultaneously connected, press the Navigation buttons to select Wired and press ENTER.

6If you have already set the Network Setting,

select Resetting. The new connection settings will reset the current network settings.

7Select IP Auto Setting or IP Manual Setting.

-If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually.

-IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the TV will automatically be allocated an IP address. If you're using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.

-IP Manual Setting: Select if there is no DHCP server on the network or you want to set the IP address manually.

8When you are finished, press EXIT.

Downloaded From TV-Manual.com Manuals