Cisco Systems AIR-ANT2513P4M-N specifications Painting the Antenna

Page 14

Painting the Antenna

Painting the Antenna

Painting the antenna and the bracket does not affect its performance if you use standard exterior-grade, oil-based or latex paint. Do not use metallic or metallic-flake paints, which will degrade antenna performance.

Note Before painting the antenna, cover the pressure-release vent on the rear, lower-left of the antenna with masking tape to prevent clogging (Figure 3).

Cisco recommends Krylon Fusion for Plastic or Rust-Oleum for Plastic (which might require a primer coat). For best results, follow the surface preparation suggestions from the paint manufacturer.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2014 Cisco Systems, Inc. All rights reserved.

Cisco Aironet Four-Port Dual-Band Polarization-Diverse Antenna (AIR-ANT2513P4M-N)

14

78-21447-01

 

 

Image 14
Contents First Published July Last Updated December 12 Technical Specifications ANT2513P4M-N front high viewGHz Antenna Radiation Patterns GHz Antenna Radiation Patterns Antenna and Bracket Dimensions Antenna and Bracket Dimensions in millimetersRear View of Antenna dimensions in millimeters System Requirements Safety InstructionsInstallation Notes Installing the Antenna Choosing a Mounting LocationContents of Antenna Bracket Kit Tools and Equipment Required Mounting on a Wall or CeilingWall-Mount Bracket and Dimensions in millimeters Slotted holes for hose clampsAssembling the Bracket Hardware Mounting on a Pole or Mast Suggested CableObtaining Documentation and Submitting a Service Request Painting the Antenna