OPPO Digital BDP-95 user manual T U P M E N U O P T I O N S

S E T U P M E N U O P T I O N S

3.Output Volume: To set to enable or disable the analog volume controls (also known as Variable Audio). The available options are:

∙Variable – Enable the analog volume control. Use the VOL-/+buttons on the remote to decrease/increase the analog audio output level (the maximum is 100).

∙Fixed – Disable the analog volume control. The VOL-/+buttons on the remote will no longer affect the analog audio output, and the volume level is fixed to 100.

4.XLR Terminal Polarity: To set the polarity of the BALANCED STEREO AUDIO OUT terminals on BDP-95. Please compare the positions of "hot" (positive) and "cold" (negative) pins on BDP-95 terminals (shown in the page 18) with those on your audio system. The available options are:

∙Normal – The XLR three-pin positions on your audio system are the same as those on BDP-95 terminals.

∙Inversion – The positions of "hot" (positive) and "cold" (negative) pins on your audio system are switched comparing with those on BDP-95 terminals.

5.Stereo Signal: To select the audio source that will be processed and sent out through the STEREO AUDIO OUT and the XLR BALANCED STEREO AUDIO OUT terminals. The available options are:

∙Down-mixed Stereo – The stereo or down-mixed stereo signals are processed and sent out from the dedicated stereo output terminals.

∙Front Left/Right – The original Front Left (FL) and Front Right (FR) signals are sent out from the dedicated stereo output terminals. The purpose is to fully utilize the better DAC hardware originally assigned to the dedicated stereo outputs for customers who prefer multi-channel speakers and do not need the dedicated stereo output or zone 2 output. When this option is selected, the dedicated stereo output ports should be used as the Front outputs of the 7.1ch / 5.1ch / Stereo Audio group. The original FL/FR RCA connectors should not be connected.

74