CD OPERATION
PLAYBACK OF A CD
1
Press the POWER/STANDBY button to turn on the unit. The POWER/STANDBY button will light blue.
2 |
Press the OPEN/CLOSE button to open the disc tray, “OPEN” will appear on the screen. Insert a disc with the label side facing up on the disc tray.
3 |
Press the OPEN/CLOSE button to close the disc tray. “CLOSE” then “READING” will appear briefly on the screen. After loading, Track 1 will automatically start playing.
4
2 | 1 |
|
Press the PAUSE button 1 to pause playback. Press the PAUSE button 1 again or the PLAY ® button 2 to resume playback.
5
1 
2
To stop playback, press the STOP ( X) button 1. Because the unit will remember where you stopped, simply press the PLAY ® button 2 to resume playback where you left off (resuming playback).
If the STOP ( X) button 1 is pressed again, the unit will enter the Stop mode.
36