Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not user-ser- viceable. If you cannot turn on the unit, contact your Onkyo dealer.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alco- hol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the volt- age requirements printed on the unit’s rear panel (e.g., AC 200-240 V, 50/60 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

Pressing ON/STANDBY to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

5.Preventing Hearing Loss Caution

Excessive sound pressure from earphones and head- phones can cause hearing loss.

6.Batteries and Heat Exposure Warning

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like.

7.Never Touch this Unit with Wet Hands—Never han- dle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

8.Handling Notes

•If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

•Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

•This unit’s top and rear panels may get warm after prolonged use. This is normal.

•If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

•When you’ve finished using this unit, remove all discs and turn off the power.

9.Installing this Unit

•Install this unit in a well-ventilated location.

•Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack. If the ventilation is inadequate, the unit may over- heat, leading to malfunction.

•Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.

•Avoid damp and dusty places, and places subject to vibrations from loudspeakers.

•Never put the unit on top of, or directly above a loudspeaker.

•Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a mal- function.

•If you install this unit near a TV, radio, or VCR, the picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.

10.To Obtain a Clear Picture—This unit is a hightech, precision device. If the lens on the optical pickup, or the disc drive mechanism becomes dirty or worn, the picture quality may be affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or worn part replacement) every 1,000 hours of use depending on the operating environment. Contact your Onkyo dealer for details.

11.Moisture Condensation

Moisture condensation may damage this unit. Read the following carefully:

Moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit.

•Moisture condensation can occur in the following situations:

–The unit is moved from a cold place to a warm place.

–A heater is turned on, or cold air from an air con- ditioner is hitting the unit.

–In the summer, when this unit is moved from an air conditioned room to a hot and humid place.

–The unit is used in a humid place.

•Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so may

damage your discs and certain parts inside this unit. If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated.

12.Region Codes—The BD/DVD standard uses region codes to control how discs can be played around the world, the world being divided into three regions (BD) or six regions (DVD). This unit will only play BD/ DVD discs that match its region code, which can be found on its rear panel.

BD-SP308 specifications

The Onkyo BD-SP308 is a standout Blu-ray player that has earned a reputation for its impressive performance and user-friendly features. Designed to provide an exceptional home entertainment experience, the BD-SP308 combines sleek aesthetics with advanced technology that elevates video and audio playback.

One of the main features of the Onkyo BD-SP308 is its capability to play Blu-ray discs in stunning 1080p resolution. This allows viewers to experience high-definition video quality that brings movies to life with vibrant colors, sharp details, and smooth motion. Additionally, the player is compatible with a variety of disc formats, including standard DVDs, CDs, and other media formats, ensuring versatility for all types of content.

The BD-SP308 is equipped with advanced video processing technologies that enhance picture quality. It utilizes the Precision Deinterlacing and Video Noise Reduction features, which work together to minimize unwanted artifacts and deliver a clearer, more detailed image. Furthermore, the player supports various high-definition audio formats such as Dolby TrueHD and DTS-HD Master Audio, providing an immersive audio experience that complements its visual capabilities.

Connectivity is another strong aspect of the Onkyo BD-SP308. It includes multiple HDMI outputs, allowing users to connect to modern TVs, projectors, or audio receivers with ease. The player also supports composite and component video outputs for older equipment, ensuring compatibility with a range of home theater systems. Additionally, it features an Ethernet port for potential firmware updates, which helps to keep the player up-to-date with the latest features and improvements.

User convenience is a priority with the BD-SP308, which comes with an intuitive remote control and an easy-to-navigate interface. The player supports fast loading times for both Blu-ray and DVD discs, reducing wait times and enhancing user satisfaction. The sleek design of the player also makes it a visually appealing addition to any home entertainment setup.

In conclusion, the Onkyo BD-SP308 Blu-ray player is a feature-rich device that brings together high-definition video and immersive audio in one package. With its advanced technology, robust connectivity options, and user-friendly design, it stands out as a solid choice for those seeking to enhance their home viewing experience. Whether you're a movie enthusiast or a casual viewer, the BD-SP308 promises to deliver exceptional performance and enjoyment.