Panasonic DMP-BD80GN, DMP-BD60GN, DMP-BD60GZ Safety precautions, Unit and media care

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Unit and media care

Disc and card handling

Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

≥Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).

≥Do not write on the label side with a ball-point pen or other writing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.

≥Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥Do not use the following discs:

–Discs with exposed adhesive from removed stickers or labels (rented discs etc).

–Discs that are badly warped or cracked.

–Irregularly shaped discs, such as heart shapes.

Maintenance

Clean this unit with a soft, dry cloth

≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to play discs.

Use the lens cleaner (not included) about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.

Lens cleaner: RP-CL720E

≥This lens cleaner may not be for sale depending on the region. ≥This lens cleaner is sold as specific for DIGA, but can be used

without problem on this unit as well.

To dispose or transfer this unit

This unit may record information of your operating procedures. If you discard this unit either by disposal or transfer, then follow the procedures to return all the settings to the factory presets to delete the recorded information. (> 38, “To return to the factory preset”) ≥When BD-Video is played back, the operation history may be

recorded in the memory of this unit. The recorded contents differ depending on the disc.

Getting started

RQT9407

3