Inserting or removing a media
SD CARD 
≥When inserting a media, ensure that it is facing the right way up.
≥When indicator on this unit's display blinks, do not turn off the unit or remove the media. Such action may result in loss of the media's contents.
≥When removing the SD card, press on the centre of the card and pull it straight out.
≥If you connect a Panasonic product with a USB connection cable, setup screen may be displayed on connected equipment. For details, refer to the instructions for the connected equipment.
∫To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card” or “USB device”.
≥If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.
8 (8)
Playing video contents
BD DVD CD SD USB
Preparation
Turn on the television and select the appropriate video input on the television.
1
1 Press [Í] to turn on the unit.
2
Play starts.
≥If the menu is displayed, press [3, 4, 2, 1] to select the item and press [OK].
≥If play does not start, press [1] (PLAY).
∫To show menus
You can display Top Menu, DIRECT NAVIGATOR or
Press [TOP MENU/DIRECT NAVIGATOR] or
≥Press [3, 4, 2, 1] to select the item and press [OK].
≥
≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC Contents Output” for NTSC discs.
([FUNCTION MENU]B“To Others”B“Setup”B“Picture”)
≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫] when you have finished playback to protect the unit’s motor, your television screen and so on.
≥Depending on media and contents, the display may change or may not appear.
≥DivX: Successive play is not possible.
≥It is not possible to playback AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.
VQT2H96