Panasonic DMP-BD77 operating instructions Messages, On the television, On the unit’s display

Messages

The following messages or service numbers may appear on the TV or unit’s display.

On the television

Cannot play.

¾You inserted an incompatible disc.

Cannot play on this unit.

¾You tried to play a non-compatible image.

No disc inserted.

¾The disc may be upside down.

$This operation is not available.

¾Some operations are unsupported by the unit. For example;

–During playback, reverse slow-motion or reverse frame-by-frame is not possible.

IP address is not set.

¾The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

On the unit’s display

SEt 

(“  ” stands for a number.)

¾The remote control and main unit are using different codes. Change the code on the

remote control.

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

Hor F

(“  ” stands for a number.)

¾There is something unusual.

¾Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.

1 Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.

2Press [Í/I] to turn the unit on.

If the service number remains displayed despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

32 VQT3V42