-- Main Feature Audio : The audio soundtrack of the main feature.
✎✎ NOTES
■■Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
■■If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.
■■Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
■■Some
■■If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).
■■If your TV is not compatible with compressed
■■If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby True HD audio.
●●Auto : Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack.
Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus.
●●Off : Leaves the dynamic range uncompressed, letting you hear the original sound.
●●On : Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the
Network Settings
When you connect this player to a network, you can use network based applications and functions such as
Configuring Your Network Connection
Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.
If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.
If you are connecting to a wireless network, disconnect any wired network connection before you begin.
To begin configuring your network connection, follow these steps:
Wired Network
ĞĞWired - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wired in the Network Settings screen, and then press the v button.
5.Select Connect button, and then press the v button. The product detects the wired connection, verifies the network connection and then connects to the network.
ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1.Select Network Status. The player searches for a network, and then displays the connection failed message.
2.On the bottom of the screen, select IP Settings, and then press the v button. The IP Settings screen appears.
3.Select the IP Setting field, and then press the v button.
4.Select Enter manually in the IP Setting field, and then press the v button.
5.Select a value to enter (IP Address, for example), and then press the v button.
Use the number keypad on your remote control to enter the numbers for the value. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.
6.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 5.
7.Repeat Steps 5 and 6 until you have filled in all values.
✎✎ NOTES
■■You can get the Network values from your Internet provider.
8.When finished entering all the values, press the RETURN or EXIT buttons. The player verifies the network connection and then connects to the network.
Wireless Network
You can setup a wireless network connection in four ways:
-- WPS(PIN)
When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected.
13