Disc Storage & Management
Disc Handling
Disc Shape
•Use discs with regular
shapes. If you use an irregular 
disc (a disc with a special shape), you can damage the player.
Holding discs
•Avoid touching the surface of a disc where data has been recorded.
Blu-ray Discs
•Do not leave a
•Be careful not to scratch or leave fingerprints on the surface of the
•Wipe off dirt or contamination on the disc with a soft cloth.
Disc Storage
Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.
•Do not keep under direct sunlight.
•Keep in a cool ventilated area.
•Store vertically.
•Keep in a clean protection jacket.
•If you move your player suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.
Handling Cautions
•Do not write on the printed side with a
•Do not use record cleaning sprays or antistatic sprays to clean discs. Also, do not use volatile chemicals, such as benzene or thinner.
•Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover
•Do not use
•Do not use discs printed with label printers available on the market.
•Do not load warped or cracked discs.
•Before connecting other components to this player, be sure to turn them off.
•Do not move the player while it is playing a disc. The disc can be scratched or damaged and the player’s internal parts can be damaged.
•Do not put a flower vase filled with water or any small metal objects on the player.
•Be careful not to put your hand into the disc slot.
•Do not place anything other than the disc in the disc slot.
•Interference from exterior sources such as lightening and static electricity can affect the normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.
•Be sure to remove the disc and turn off the player after use.
•Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.
•To clean a disc, wipe it in a straight line from the inside to the outside of
the disc.
• Do not expose the player to any liquid.
•When the player is turned off, but still connected to a wall socket, it is in standby mode and will continue to draw power.
02 Safety Information
English 5