Toshiba BDX1100KU owner manual Audio Setting

•[Video Adjust]

Select a predefined setting of the video.

1.Press OK .

2.Press/ to adjust the video

Brightness, Contrast, Hue and Saturation.

{Brightness}- press t/ to adjust the brightness of display, goes left means dark and right means bright {Contrast}- press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast.

{Hue}- press t/ to adjust the Hue of display, goes left means low hue and right means high hue.

{Saturation}- press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation.

3.Press RETURN to exit.

Brightness

Contrast

Hue

Saturation

Change RETURN Exit

•[Sharpness]

Select the level of sharpness: High, Medium, Low

{High} - Select High sharpness level

{Medium} - Select Medium sharpness level

{Low} - Select Low sharpness level

[Motion Video Process]

... Display Setting...

TV	Video Mode
Video Process
Motion Video...
Move cursor key to select menu option		SETUP	Exit
then use “OK” key to select

•[Video Mode]

Select the output mode of video,options include: Standard, Vivid, Smooth, these can change the output display.

{Standard} output video signal without any processing and in standard mode. {Vivid} output video signal in vibrant color mode.

{Smooth} output video signal in smooth mode.

Audio Setting

1. Press SETUP

[General Setting] menu is displayed. 2. Press  to select [Audio Setting],

then press  .

3. Select an option, press  to access.

... Audio Setting...

Audio Output	Spdif	PCM
	HDMI	PCM
	Down_samp	48K
	DRC	Off

Move cursor key to select menu option	SETUP	Exit
then use “OK” key to select

4. Press / to select a setup option and press 

5. Select the setting you wish to change and press OK to confirm.

-Press  to return to the previous menu.

-Press SETUP to exit the menu.

[Audio Output]

•[Spdif]

Select the output mode of COAXIAL jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output digital signal without any processing.

{PCM} – Output digital signal with processing, only two channels export. {Re-encode} – Auto select signal type from COAXIAL jack according to the Audio stream on disc.

{Off} – No output for S/PDIF.

•[HDMI]

Select the output mode of HDMI Out jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output HDMI digital signal without any processing. {PCM} – Output HDMI digital signal with processing, only two channels export.

{Re-encode} – Auto select signal type from HDMI Out jack according to the Audio stream on disc.

{Off} – No output for HDMI.

•[Down_samp]

Select the digital audio signal sampling frequency.

{48K} – For discs recorded at sampling rate of 48 kHz.

{96K} – For discs recorded at sampling rate of 96 kHz.

English

19