Identifi cation of Controls
Front Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1.Disc tray
2.Power indicator
3.Remote sensor
4.OPEN/CLOSE button
5.STOP button
6.PLAY button
7.POWER button
•Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)
Rear Panel
1 | 2 | 3 | 4 | 5 |
1.AC power cord
•Connect to a standard AC outlet to supply power to this unit.
•Unplug this cord from the AC outlet to completely turn off the unit.
2.COAXIAL DIGITAL AUDIO OUT jack
•Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a coaxial digital audio input jack using a coaxial digital audio cable.
3.HDMI OUT jack
4.USB port
•Use to connect a USB flash drive/wireless LAN adapter (not included).
5.LAN terminal
•Use to connect network equipment with a LAN cable.
•Use to connect a TV with an HDMI compatible port via an HDMI cable.
*HDMI connection is required. Cables are not included. Analog connection is not supported.
7