14 System Setting
Wired Network Setup | 5. The player will ask you to test the network | |
If there is a DHCP server on the local area network | connection. Select [OK] and press ENTER (b) to | |
complete the network connection. | ||
(LAN) via wired connection, this player will | ||
6. If you select [Test] and press ENTER (b) at | ||
automatically be allocated an IP address. After | ||
step 5 above, the network connection status is | ||
making the physical connection, a small number of | ||
displayed on the screen. | ||
home networks may require the player’s network | ||
You can also test it on the [Connection Status] | ||
setting to be adjusted. Adjust the [NETWORK] | ||
in the [Setup] menu. | ||
setting as follow. | ||
| ||
Preparation |
| |
Before setting the wired network, you need to |
| |
connect the broadband internet to your home |
| |
network. |
|
1. Select [Connection Setting] option in the
3[Setup] menu then press ENTER (b).
System Setting
2.Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.
3.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
4.Select [OK] and press ENTER (b) to apply network settings.
��
9:10:41