JVC XV-BP1 manual Troubleshooting, Symptom Possible Cause Correction

BD310-JN_BUSAJJK_OM_ENG 2/27/09 4:58 PM Page 34

Troubleshooting

Symptom		Possible Cause		Correction
No power.	•	The power cord is disconnected.	•	Plug the power cord into the wall out-
				let securely.
The power is on, but	•	No disc is inserted.	•	Insert a disc. (Check the disc indica-
the player does not				tor in the display window is lit.)
work.
No picture.	•	The TV is not set to receive video	•	Select the appropriate video input
		signal output.		mode on the TV.
	•	The video cable is not connected	•	Connect the video cable securely.
		securely.
	•	The selected resolution is not capa-	•	Select another resolution using
		ble with your TV.		RESOLUTION button.
No sound.	•	The equipment connected with the	•	Select the correct input mode of the
		audio cable is not set to receive disc		audio receiver so you can listen to
		signal output.		the sound from the player.
	•	The power of the equipment connect-	•	Turn on the equipment connected
		ed with the audio cable is turned off.		with the audio cable.
	•	The [AUDIO] options are set to the	•	Set the [AUDIO] options to the cor-
		wrong position.		rect position (see page 20).
	•	The player is in reverse play, fast for-	•	Return to the normal playback.
		ward, slow motion or pause mode.
The player does not	•	The disc is upside down.	•	Insert the disc with the playback side
start playback.				down.
	•	An unplayable disc is inserted.	•	Insert a playable disc. (Check the
				disc type and regional code.)
	•	The rating level is set.	•	Change the rating level.
	•	The disc was recorded on another	•	Finalize the disc on that unit.
		unit and was not finalized.
BD-Live feature does	• A USB Flash Drive is not connected.		•	Connect a FAT16 or FAT32 formatted
				USB Flash Drive to the USB port
not work.
				(see page 10).
	•	The connected USB Flash Drive	•	Secure at least 1GB free space in
		does not have enough space.		the USB Flash Drive for using
				BD-Live features
	•	Internet connection is not established.	•	Ensure that the unit is correctly con-
				nected to the local area network and
				can access the internet (see ) 16).
	•	Your broadband speed is not fast	•	Contact your Internet Service
		enough to use the BD-Live features.		Provider (ISP) and increase the
				broadband speed is recommended.
	•	The [BD-LIVE connection] option in	•	Set the [BD-LIVE connection] option
		the [Setup] menu is set to		to [Permitted].
		[Prohibited].
The Remote Control	•	The Remote Control is not pointed at	•	Point the Remote Control at the
does not work properly.		the remote sensor on the player.		remote sensor of the player.
	•	The Remote Control is too far from	•	Operate the Remote Control closer to
		the player.		the player.
The system does not	•	A state is unstable.	•	Unplug the power cord and then plug
function at all.				the power cord again after more than
				five seconds.

34