LG Electronics BH10 owner manual Location and Function of Controls, Front Panel Rear Panel

Page 7

Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives. These unreadable discs may need to be read using the CD-R/RW drive they were created with. The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read compatible (UDF compatible) CD-ROMs.

Multiread compatible (UDF compatible) CD-ROMs are CD-ROMs that can read low reflectance and support Packet Write.

Please note: Certain software (i.e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. While this Blu-ray Disc Rewriter can read DVD-video or BD-MV(BD-ROM) discs, decoding them to

display on your pc’s monitor requires separate MPEG, H.264 or VC-1 decoding that is done by separate hardware (either an MPEG, H.264 or VC-1 decoder card or MPEG, H.264 or VC-1 decoding done by your video card), or separate software that you install to do MPEG, H.264 or VC-1 decoding. For further details, refer to the documentation that comes with MPEG, H.264 or VC-1 software.

Location and Function of Controls

Front Panel

Rear Panel

1

2 3

4

1.Disc Tray

2.Drive activity indicator

The LED is used to indicate the operation of Blu-ray Disc Rewriter.

3.Emergency Eject Hole

4.Eject Button

12

1.SATA Power Connector (15 pin)

2.SATA Data Connector (7 pin)

4

Image 7
Contents Blu-ray Disc Rewriter FCC Compliance Statement Page Features ContentsImportant Precautions Operating Environment System EnvironmentFront Panel Rear Panel Location and Function of ControlsRemoving the Computer Cover Installing the DriveMounting the Drive Connecting the Sata Data Cable Connecting the Sata Power CablePC Connection For Windows XP Users Device DriversIncluded Software Emergency Eject How to Use the DiscsBefore Requesting Service TroubleshootingGeneral Supported Discs *1 SpecificationsPage Made by