Haier LEY26C600, LEY32C600 user manual Introduction

02Introduction

CAUTION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LED-TVs are high voltage instruments. When you clean up dust or water drops on the LED PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.

Main features

1Used as Television, display terminal, PC display

INSTALLATION

*Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

*Allow enough space between the TV and the wall to permit ventilation.

*Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

*Do not cover the ventilation openings when using theTV.

4NICAM

2 High luminance, wide viewing	5 Time-shift
Angle

3HDMI interface and SCART Interface

Main parameter

Panel		26"		32"
TV System		PAL-B/G I D/K
		SECAM- B/G D/K L	L'
Video Signal System		PAL/SECAM
Input Power Voltage		AC 100V-240V 50/60Hz
Power consumption		55W		90W
Audio Output Power	THD 7%	2x5W		2x8W
Signal Input		Analog RGB(PC)x1
		High-Definition Multimedia Interface (HDMI) x 2
		Vdieo Input x1
		Audio Input x2
		USB Input x1
		YPbPr x1
		SCART x 1
		COMMON IN INTERFACE(CI)
		PC audio x1
Horizontal definition	TV line	CompositeVideo input	>=350
		YPbPr	>=400

P.06