Haier L37A9-AKF owner manual Adjust Menu, Clock, Phase, Position

Adjust Menu

In VGA input mode , H-Position and V-Position can be used to adjust the picture position.

When VGA HDMI input mode is set

1 Press MENU button and then use VOL+/- button to select Adjust menu .

2 Press the VOL+ button and then use CH+/- button to select the item to be adjusted, then press the VOL+/- button to adjust the desired value.

Auto Adjust		>>>
Clock
		0
Phase
		0
H-Position
		50
V-Position
		50
I/P Info.	1366x768@50Hz

Auto Adjust

This is used to reset the default setting parameters (After the operation, Auto Adjusting will be display on the screen)

Picture Sound

Tuning Function Adjust Timer

Clock

This is used for adjusting H Position and V Position as well as relative parameters in VGA modes.

Phase

This is used for adjusting the phase of pixel clock in VGA mode.

H Position

Horizontal position of picture can be adjusted in this item.

V Position

Vertical position of picture can be adjusted in this item.

Note:

1.As adjusting H position or V position parameter, It is natural that the picture will have faintness once in a while if the range is more, then to adjust contrarily to normal position.

2.As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen.

27