Tuning
You may operate it either on the TV or on the remote control. Here is mainly about the remote control.
Automatic search
CH+
Automatic search
1.Press MENU button repeatedly to select the TUNING menu ,and the function menu will displayed in the following
sequence:
PICTURE
SOUND
TUNING
FUNCTION 
VOL- MENU VOL+
CH-
2.Press CH+/- button to move the indicator to SEARCH,then press VOL+ to enter the submenu, press CH+/- to select AUTO.
A
B
C
TUNING
POSITION 2
BANDVH
SKIPOFF SEARCH
84.13MHZ
SELECT
CONFIRM 
3.Press VOL+ button, then AUTO mode will work. The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel.
| TUNING |
|
| M.F.T | UP |
| FINE TUNE | DOWN |
A | AUTO |
|
C |
| |
B |
|
|
| FAST TUNE |
|
84.13MHZ
SELECT
CONFIRM 
ASM | VH | 0 |
STOP |
|
|
CH+
VOL- MENU VOL+
CH-
If you want to stop the search, just press VOL- button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed.
After searching
Press CH+/- button to check the channels.
If the colour is abnormal in a certain channel, it may be the colour system has not been set properly, so you should adjust it to the proper system (Reference to page 7).
FAST TUNE: This function is same as AUTO, but is can make the search time shorter(can only available in some areas), generally, please use the AUTO function.