Backup VIA USB Memory Stick

Section 8

Note: The USB memory stick is not supplied with this kit. Please purchase only the listed USB models in the Appendix section (11.1) as only they are compatible with this DVR.

The DVR system has an enhanced back-up feature so that it’s possible to transfer the video data image recorded on the hard drive to a USB memory stick.

You must format the USB stick to a ‘FAT32’ File system from a PC first. This can be done as follows:

1.Insert the USB stick into the USB slot on the PC.

2.Move the cursor on to the ‘My Computer’ icon on the desktop and click the right mouse button.

3.Move the cursor on to the (F:) drive, click the right mouse button and select ‘Format…’ from the menu.

4.Move the cursor on to File system and select ‘FAT32’ by clicking the left mouse button.

5.Select ‘Start’ to begin the format process.

6.After the process is complete, the USB stick is now ready to use with your DVR.

Before you back up a stream of video data, have the USB memory stick ready and attach it into the USB port located on the rear panel of the DVR.

In order to save the video data with the back-up device, you should first start with playback from the required time you wish to back-up (See PLAYBACK WITH TIME SEARCH FUNCTION section). During playback, press the [MENU] button. Use the [UP] key or [DOWN] key to move to 'Start time’ or ‘End time’ and press [SEL] button to set the start and end times of the recorded video data which will be saved on the back-up device.

Whilst	playing back, if you want to setup the end time faster, you can press the
[	FWD] button to fast forward the video being played to the desired end time, and then
press [SEL] to select the end time again on the screen again.

Move to “USB copy”, and press the [SEL] button or click the left mouse button to back up the selected stream of video data

on to the USB memory stick (Fig. 8.01).

Fig. 8.01