RCA RCR3373 owner manual Universal Remote Control, Three-component Universal Remote

RCR3273 / RCR3373

Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

INFO key	Component
displays	keys (TV,
information	SAT•CBL,
for the	DVD•VCR)
component
you’re
controlling	Dedicated
	MENU and
	GUIDE
Transport	keys let
	you access
keys,
	advanced
including
	component
SKIP and
	functions
SLOW, give
you better
DVD/DVR
control
	CH and
	VOL keys
	have dual
	functions:
	they can
	act as
	navigation
	keys in
	menu
	systems
	as well as
	channel
	and volume
Actual	controllers
	outside the
model may
	menus
vary from
picture
shown

The INPUT and — (dash) key has three functions: (1) it toggles through all the video sources connected to your TV; (2) when the remote is in VCR mode, this button toggles between VCR and the TV input; (3) when you’re entering digital channel numbers directly, this button lets you separate the main channel number from the subchannel number

Three-component

Universal Remote

Congratulations on your purchase of this three-component universal remote. This universal remote controls up to three electronic components and makes juggling remote controls a thing of the past. Your remote is guaranteed to work with all brands of components. The three-component universal remote is easy to use, easy to program and gives you control at the touch of your fingertips.

SAVE THIS MANUAL AND THE CODE LISTS! Remote controls can sometimes lose their programming when you change the batteries. Make sure you keep the manual and code lists in a safe place so that you can reprogram the remote if you need to.

Tip: The three-component universal remote is already programmed to operate most RCA, GE and PROSCAN branded TVs, VCRs, DVD players and satellite receivers. Just press the corresponding key—DVD•VCR for a DVD player, TV for a television, SAT·CBL for a satellite receiver.

Battery Installation and Information

Your universal remote requires two AAA Alkaline batteries (batteries may or may not be included, depending on model).

To install the batteries:

1. Remove the battery compartment cover.

2.Insert the batteries, matching the batteries to the (+) and (–) marks inside the battery compartment.

3.Push the battery cover back into place.

Note: If you are replacing batteries, try not to press any buttons after you’ve taken the old batteries out. Pressing buttons while replacing batteries causes the remote to lose the devices you’ve programmed. You will need to program the remote again.

Battery Precautions:

•Do not mix old and new batteries.

•Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium) batteries.

•Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations.

Battery Saver

Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your battery life should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions.

Care and Maintenance

•Keep the remote dry. If it gets wet, wipe it dry immediately.

•Use and store the remote only in normal temperature environments.

•Handle the remote gently and carefully. Don’t drop it.

•Keep the remote away from dust and dirt.

•Wipe the remote with a damp cloth occasionally to keep it looking new.

•Modifying or tampering with the remote’s internal components can cause malfunction and invalidate its warranty.

Programming Your Remote

Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (See Code Lists enclosed or go to rca.com/codefinder). These codes enable the remote to communicate with your components. Each brand and each component has its own “language,” and, by programming the correct codes into your remote, you tell the remote to “speak the same language” as your components.