RCA RCU800, RCU403 manual Troubleshooting

Page 27

RCU800B_IB_REVB.qx4 2/11/04 13:05 Page 27

Troubleshooting

Problem: The remote can’t be programmed to operate your component.

•You may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remote sends the code and the component’s IR sensor reads the code.

Therefore, there must be an unobstructed path between the remote and the IR sensor on the component. Move closer and make sure you point the remote at the component (VCR or DVD player when programming the VCR•DVD key; TV when programming the TV key; cable box or satellite receiver when you’re programming the DBS•CABLE key).

•If you’ve entered all of the codes for your brand that are in the accompanying Code List and followed the instructions, try one of the Code Search methods (See Code Search on page 24)

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate.

•To program the 3 component universal remote to operate a combination unit (TV/VCR or TV/DVD), first try the VCR or DVD codes for your brand. Some units, however, require that you program both the TV (using the TV codes) and the VCR or DVD (using the VCR or DVD codes) for full operation.

Problem: The indicator light does not light when you press a key.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate.

•You may have pressed an invalid key for the mode the remote is in (for example, REC only works in VCR Mode).

•Make sure the batteries are properly installed.

•Replace the batteries with two new AAA batteries. Reprogramming may be required.

Problem: The remote does not operate your component.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate.

•Remove any obstacles between the remote and the component. Make sure to aim the remote at the IR sensor on the component.

•Make sure the batteries are properly installed (See Battery Installation on page 21).

•Replace the batteries with two new AAA batteries. Reprogramming may be required.

•Reset the remote. Remove the batteries, then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote. Release the number 1 key, reinstall the batteries, and try the remote again. Reprogramming will be required.

Problem: The remote is not performing commands properly.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate.

•Make sure component is “ready” (e.g., DVD player has disc loaded; VCR has tape loaded, etc.)

•You may have pressed an invalid key for the mode the remote is in (for example, REC only works in VCR mode).

•If you’re trying to turn on an RCA, GE or PROSCAN component, press the component key (TV, VCR•DVD, DBS•CABLE) instead of the ON•OFF key.

•If operating a VCR to record, you must press the REC key two times.

•If you’re trying to change channels, try pressing the ENTER key after entering the channel number as this is a requirement of certain models and brands.

•There is a possibility that a programmed code may only be able to control some of your component features (e.g., only turns a component on and off). Follow the steps provided for programming the remote (See Programming Sections on pages 22-23). If the component can be turned on and off, make sure you press the CHAN UP/DOWN key to see if the component responds. If not, try the next code from the list.

Problem: The VCR won’t record.

•As a safety feature, you must press the REC key twice to begin recording.

•Make sure the tape is properly loaded in the VCR.

•Make sure the tape is not write-protected. If the safety tab is removed the tape is write-protected and you cannot record onto that tape.

Problem: The remote will not change channels.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate.

•Press the ENTER key after you enter a channel number.

RCU403

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Universal Table of Contents Key Descriptions Battery Information and InstallationOther Keys Listed Alphabetically Primary Key Descriptions For Video OperationsPress the Audio key to enable the Audio Mode Secondary Key Descriptions For Audio OperationsProgram for TV-Direct Entry Method Program for DVD/CD Systems-Direct Entry Method Program for VCR1 and VCR2-Direct Entry MethodProgram for SATELLITE-Direct Entry Method Program for Audio Systems-Direct Entry Method Program for Cable Box-Direct Entry MethodTurning on the Receiver Or MINI-SYSTEM Operating Audio System FunctionsCode Search key Program for AUX-Direct Entry MethodCode Search Methods Manual Code SearchAuto Code Search Code Retrieval Sleep FeatureProgramming the Sleep Timer Canceling the Sleep TimerExiting a Menu System Accessing a Menu SystemOn-screen Menus Highlighting and Selecting Menu ItemsTroubleshooting Press the Enter key after you enter a channel number RCU800 Code List Portable DVD Player Codes TV/VCR/DVD Combo Codes Remote Direct Entry Method Battery Installation and Information Program for DVD or VCR-Direct Entry Method Program for Satellite or Cable Box-Direct Entry Method Code Search Methods Programming Sleep Feature Sleep Feature Select Models OnlyVcrdvd or Dbscable Using On-screen MenusTroubleshooting Problem The component’s menu doesn’t appear on the TV screen RCU403 Code List PVR* Codes Limited 90-Day Warranty Remotes for the Price

RCU403, RCU800 specifications

The RCA RCU800 and RCU403 are two universal remote control models designed to simplify home entertainment experiences. Both remotes are compatible with a variety of devices, including televisions, DVD players, cable boxes, and more, allowing users to consolidate multiple remote controls into one user-friendly gadget.

The RCA RCU800 is a sleek, modern remote featuring a user-friendly layout. It supports up to 8 devices, making it a versatile option for those with extensive home entertainment systems. One of its standout features is the dedicated buttons for popular streaming services, enabling quick access to platforms like Netflix and Hulu. The RCU800 also utilizes an LCD screen that displays device status and provides programming information, which enhances user interaction.

In terms of technology, the RCU800 is equipped with Smart Setup technology that allows users to easily configure the remote to control various devices. This feature eliminates the need for complicated programming, making setup a hassle-free experience. The remote has an ergonomic design, ensuring comfort during extended use and offering easy navigation through its well-structured button layout.

On the other hand, the RCA RCU403 is designed with simplicity in mind. It supports up to 4 devices, making it ideal for users with fewer components in their entertainment setup. The RCU403 features a traditional button design, ensuring that important functions are always within reach. The remote includes dedicated buttons for TV, DVD, and other common devices, facilitating straightforward operation without unnecessary complexity.

Both models incorporate infrared technology, which is a standard for most universal remotes, allowing users to control their devices from a distance. They are pre-programmed with codes for various brands and devices, ensuring compatibility out of the box. Additionally, RCA provides an extensive code library, offering users the ability to manually input device codes if automatic programming does not succeed.

In conclusion, the RCA RCU800 and RCU403 provide options for users seeking to streamline their home entertainment experience. With features designed for ease of use and advanced compatibility, these remotes cater to different user needs, whether it’s a comprehensive setup with the RCU800 or a straightforward approach with the RCU403. Their intuitive designs and reliable performance make them excellent choices for managing modern entertainment systems efficiently.
Top Page Image Contents