Auto Code Search
CODE | 1. | Manually turn on the component |
SEARCH |
| you want the remote to operate. |
| 2. | Press and hold the CODE SEARCH |
|
| key for approximately three seconds |
|
| until all four component keys light up. |
|
| Then release the CODE SEARCH key. |
3.Press and release the component key that corresponds to the component
| you want the remote to operate (TV, | |
| VCR, or DBS•CABLE). The chosen | |
| component key remains lit. | |
| Note: For DVD or AUX, press | |
| DVD•AUX, then the component key | |
| corresponding to the component | |
| to be stored under the AUX key. For | |
| DVD, press DVD•AUX, then the VCR | |
| key. For an auxiliary component, | |
| press DVD•AUX, then the | |
| corresponding component key | |
| (TV, VCR, DBS•CABLE). | |
ON•OFF | 4. Aim the remote at the component | |
and press the ON•OFF key once. | ||
| The remote automatically sends every | |
| code for the specified component | |
| one at a time, with a three second | |
| delay between each code. The lighted | |
| component key blinks each time a | |
| new code is sent. Keep the remote | |
| aimed at the component throughout | |
| the process. | |
| 5. As soon as the component turns | |
ENTER | off, you must press the ENTER key | |
immediately so the remote stores the | ||
| ||
| correct code. The lighted component | |
| key then turns off. If you don’t press | |
| ENTER within three seconds, the | |
| remote will send the next code in the | |
| list, and you will have to start over | |
| from step 2. |
6.Use Code Retrieval to identify the code for your component for future reference.
Code Retrieval
If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries).
1.Press and hold the CODE SEARCH key for approximately three seconds
CODE |
| until all four component keys light up. |
SEARCH |
| |
| Then release the CODE SEARCH key. | |
|
| |
|
| 2. Press and release the component |
DBS• |
| key that matches the component’s |
DVD•AUX CABLE VCR | TV | code you are retrieving (TV, VCR, or |
|
| |
|
| DBS•CABLE). The chosen |
|
| component key remains lit. |
10